847.412.4880

RGBW LED-To-Wire Gripper Connecter

Joins RGBW LED tapelight sections
No soldering or wire stripping required
Do not exceed 5A maximum load.

SKU: LLI-GC-LL-RGBW Category:
RGB LED-TO-WIRE GRIPPER CONNECT RGB LED-TO-LED GRIPPER CONNECT

No Wire Stripping, No Soldering No Soldering

DIMENSIONS

0.96” L x 0.67” W x 0.30” H Compatible with 12mm RGBW tapes only 0.77” L x 0.67” W x 0.30” H Compatible with 12mm RGBW tapes only

INSTALLATION

No soldering or wire stripping required. Open both ends of the connector, insert LED tape and wiring, and tightly close connector. No soldering required. Open both ends of the connector, insert LED tape, and tightly close connector.

WARNING, RISK OF FIRE

do not exceed 5A maximum load. do not exceed 5A maximum load.

COMPATIBILITY

Compatible with 12mm IP20 dry and IP65 wet location tapes. This product is NOT rated for use in wet locations. Compatible with 12mm IP20 dry and IP65 wet location tapes. This product is NOT rated for use in wet locations.

WIRING

Wire not included, accepts 18-22AWGWire