847.412.4880

Single Color LED-To-Wire Gripper Connector

Joins wire to single color LED tapelight
No soldering or wire stripping required
Wire not included, accepts 18-22AWG wire
Do not exceed 5A maximum load

SKU: LLI-GC-LW-SC Category:
SINGLE COLOR LED-TO-WIRE GRIPPER CONNECT SINGLE COLOR LED-TO-LED GRIPPER CONNECT

No Wire Stripping, No Soldering No Soldering

DIMENSIONS

0.96” L x 0.57” W x 0.30” H Compatible with 10mm tapes only 0.77” L x 0.57” W x 0.30” H Compatible with 10mm tapes only

INSTALLATION

No soldering or wire stripping required. Open both ends of the connector, insert LED tape and wiring, and tightly close connector. No soldering required. Open both ends of the connector, insert LED tape, and tightly close connector.

WARNING, RISK OF FIRE

do not exceed 5A maximum load. do not exceed 5A maximum load.

COMPATIBILITY

Compatible with 10mm IP20 dry and IP65 wet location tapes. This product is NOT rated for use in wet locations. Compatible with 10mm IP20 dry and IP65 wet location tapes. This product is NOT rated for use in wet locations.

WIRING

Wire not included, accepts 18-22AWGWire